实验环境

主机名IP角色VIP
master192.168.1.1主库,mha-node192.168.1.10
slave1192.168.1.2从库,mha-nodenone
slave2192.168.1.3从库,mha-node,mha-managernone

其中:

  • 系统为Centos 6.5 x86_64
  • mysql版本为 mysql 5.5

Note: 本文中出现的主机名、ip地址,请自行根据环境替换!

准备工作

  • 各主机添加hosts
echo "192.168.1.1    master" >> /etc/hosts
echo "192.168.1.2    slave1" >> /etc/hosts
echo "192.168.1.3    slave2" >> /etc/hosts
  • 各主机建立ssh信任

  • 搭建主从复制

    Note 从库手动设置set global relay_log_purge = 0

  • 创建mha监控账户

 grant all on *.* to mha@'192.168.1.%' identified by '123456' 

MHA

各主机安装perl依赖包

 rpm -ivh https://dl.fedoraproject.org/pub/epel/epel-release-latest-6.noarch.rpm
 yum install -y perl-DBD-MySQL

在slave2上,还需要安装

 yum install -y perl-Config-Tiny perl-Log-Dispatch perl-Parallel-ForkManager perl-Time-HiRes

各主机安装mha-node

 rpm -ivh mha4mysql-node-0.56-0.el6.noarch.rpm

在slave2上,还需要安装

rpm -ivh mha4mysql-manager-0.56-0.el6.noarch.rpm

Note:以下均在slave2上操作,就是充当mha-manager的主机

添加配置文件,正式环境下去掉注释,这里是为了说明!

$ sudo mkdir /etc/mha
$ sudo mkdir -p /var/log/masterha/app1
$ cat /etc/mha/app1.conf
[server default]
manager_log=/var/log/masterha/app1/manager.log
manager_workdir=/var/log/masterha/app1
master_binlog_dir=/home/user/mysql/data #mysql的datadir,请自行修改
master_ip_failover_script=/usr/local/bin/master_ip_failover
master_ip_online_change_script=/usr/local/bin/master_ip_online_change
ping_interval=1
remote_workdir=/tmp
repl_password=password	#主从复制账号密码
repl_user=repUser	#主从复制账号
#report_script=/usr/local/bin/send_report
secondary_check_script=/usr/bin/masterha_secondary_check -s slave1 -s master --user=root --master_host=master --master_ip=192.168.1.1 --master_port=3306
ssh_user=root
user=mha	#在mysql中创建mha的监控用户
password=123456  #mha监控用户的密码

[server1]
hostname=master
port=3306

[server2]
candidate_master=1	#指定为备选master
hostname=slave1
port=3306

[server3]
hostname=slave2
port=3306

添加master_ip_failover脚本,实现failover时自动切换vip

$ cat /usr/local/bin/master_ip_failover
#!/usr/bin/env perl

use strict;
use warnings FATAL => 'all';

use Getopt::Long;

my (
    $command,          $ssh_user,        $orig_master_host, $orig_master_ip,
    $orig_master_port, $new_master_host, $new_master_ip,    $new_master_port
);

# 设置vip及要绑定的网卡,这里一定要看一下master和slave1的网卡名是否一致
# 第一次运行mha时需要在master上手工绑定vip:/sbin/ifconfig eth1:1 192.168.1.10/24
my $vip = '192.168.1.10/24';
my $key = '1';
my $ssh_start_vip = "/sbin/ifconfig eth1:$key $vip";
my $ssh_stop_vip = "/sbin/ifconfig eth1:$key down";

GetOptions(
    'command=s'          => \$command,
    'ssh_user=s'         => \$ssh_user,
    'orig_master_host=s' => \$orig_master_host,
    'orig_master_ip=s'   => \$orig_master_ip,
    'orig_master_port=i' => \$orig_master_port,
    'new_master_host=s'  => \$new_master_host,
    'new_master_ip=s'    => \$new_master_ip,
    'new_master_port=i'  => \$new_master_port,
);

exit &main();

sub main {

    print "\n\nIN SCRIPT TEST====$ssh_stop_vip==$ssh_start_vip===\n\n";

    if ( $command eq "stop" || $command eq "stopssh" ) {

        my $exit_code = 1;
        eval {
            print "Disabling the VIP on old master: $orig_master_host \n";
            &stop_vip();
            $exit_code = 0;
        };
        if ($@) {
            warn "Got Error: $@\n";
            exit $exit_code;
        }
        exit $exit_code;
    }
    elsif ( $command eq "start" ) {

        my $exit_code = 10;
        eval {
            print "Enabling the VIP - $vip on the new master - $new_master_host \n";
            &start_vip();
            $exit_code = 0;
        };
        if ($@) {
            warn $@;
            exit $exit_code;
        }
        exit $exit_code;
    }
    elsif ( $command eq "status" ) {
        print "Checking the Status of the script.. OK \n";
        exit 0;
    }
    else {
        &usage();
        exit 1;
    }
}

sub start_vip() {
    `ssh $ssh_user\@$new_master_host \" $ssh_start_vip \"`;
}
sub stop_vip() {
     return 0  unless  ($ssh_user);
    `ssh $ssh_user\@$orig_master_host \" $ssh_stop_vip \"`;
}

sub usage {
    print
    "Usage: master_ip_failover --command=start|stop|stopssh|status --orig_master_host=host --orig_master_ip=ip --orig_master_port=port --new_master_host=host --new_master_ip=ip --new_master_port=port\n";
}

添加master_ip_online_change

此脚本可人工切换主库

#!/usr/bin/env perl

## Note: This is a sample script and is not complete. Modify the script based on your environment.

use strict;
use warnings FATAL => 'all';

use Getopt::Long;
use MHA::DBHelper;
use MHA::NodeUtil;
use Time::HiRes qw( sleep gettimeofday tv_interval );
use Data::Dumper;

my $_tstart;
my $_running_interval = 0.1;
my (
  $command,          $orig_master_host, $orig_master_ip,
  $orig_master_port, $orig_master_user, 
  $new_master_host,  $new_master_ip,    $new_master_port,
  $new_master_user,  
);


my $vip = '192.168.1.10/24';  # Virtual IP 
my $key = "1"; 
my $ssh_start_vip = "/sbin/ifconfig eth1:$key $vip";
my $ssh_stop_vip = "/sbin/ifconfig eth1:$key down";
my $ssh_user = "root";
my $new_master_password = "123456";
my $orig_master_password = "123456";
GetOptions(
  'command=s'              => \$command,
  #'ssh_user=s'             => \$ssh_user,  
  'orig_master_host=s'     => \$orig_master_host,
  'orig_master_ip=s'       => \$orig_master_ip,
  'orig_master_port=i'     => \$orig_master_port,
  'orig_master_user=s'     => \$orig_master_user,
  #'orig_master_password=s' => \$orig_master_password,
  'new_master_host=s'      => \$new_master_host,
  'new_master_ip=s'        => \$new_master_ip,
  'new_master_port=i'      => \$new_master_port,
  'new_master_user=s'      => \$new_master_user,
  #'new_master_password=s'  => \$new_master_password,
);

exit &main();

sub current_time_us {
  my ( $sec, $microsec ) = gettimeofday();
  my $curdate = localtime($sec);
  return $curdate . " " . sprintf( "%06d", $microsec );
}

sub sleep_until {
  my $elapsed = tv_interval($_tstart);
  if ( $_running_interval > $elapsed ) {
    sleep( $_running_interval - $elapsed );
  }
}

sub get_threads_util {
  my $dbh                    = shift;
  my $my_connection_id       = shift;
  my $running_time_threshold = shift;
  my $type                   = shift;
  $running_time_threshold = 0 unless ($running_time_threshold);
  $type                   = 0 unless ($type);
  my @threads;

  my $sth = $dbh->prepare("SHOW PROCESSLIST");
  $sth->execute();

  while ( my $ref = $sth->fetchrow_hashref() ) {
    my $id         = $ref->{Id};
    my $user       = $ref->{User};
    my $host       = $ref->{Host};
    my $command    = $ref->{Command};
    my $state      = $ref->{State};
    my $query_time = $ref->{Time};
    my $info       = $ref->{Info};
    $info =~ s/^\s*(.*?)\s*$/$1/ if defined($info);
    next if ( $my_connection_id == $id );
    next if ( defined($query_time) && $query_time < $running_time_threshold );
    next if ( defined($command)    && $command eq "Binlog Dump" );
    next if ( defined($user)       && $user eq "system user" );
    next
      if ( defined($command)
      && $command eq "Sleep"
      && defined($query_time)
      && $query_time >= 1 );

    if ( $type >= 1 ) {
      next if ( defined($command) && $command eq "Sleep" );
      next if ( defined($command) && $command eq "Connect" );
    }

    if ( $type >= 2 ) {
      next if ( defined($info) && $info =~ m/^select/i );
      next if ( defined($info) && $info =~ m/^show/i );
    }

    push @threads, $ref;
  }
  return @threads;
}

sub main {
  if ( $command eq "stop" ) {
    ## Gracefully killing connections on the current master
    # 1. Set read_only= 1 on the new master
    # 2. DROP USER so that no app user can establish new connections
    # 3. Set read_only= 1 on the current master
    # 4. Kill current queries
    # * Any database access failure will result in script die.
    my $exit_code = 1;
    eval {
      ## Setting read_only=1 on the new master (to avoid accident)
      my $new_master_handler = new MHA::DBHelper();

      # args: hostname, port, user, password, raise_error(die_on_error)_or_not
      $new_master_handler->connect( $new_master_ip, $new_master_port,
        $new_master_user, $new_master_password, 1 );
      print current_time_us() . " Set read_only on the new master.. ";
      $new_master_handler->enable_read_only();
      if ( $new_master_handler->is_read_only() ) {
        print "ok.\n";
      }
      else {
        die "Failed!\n";
      }
      $new_master_handler->disconnect();

      # Connecting to the orig master, die if any database error happens
      my $orig_master_handler = new MHA::DBHelper();
      $orig_master_handler->connect( $orig_master_ip, $orig_master_port,
        $orig_master_user, $orig_master_password, 1 );

      ## Drop application user so that nobody can connect. Disabling per-session binlog beforehand
      #$orig_master_handler->disable_log_bin_local();
      #print current_time_us() . " Drpping app user on the orig master..\n";
      #FIXME_xxx_drop_app_user($orig_master_handler);

      ## Waiting for N * 100 milliseconds so that current connections can exit
      my $time_until_read_only = 15;
      $_tstart = [gettimeofday];
      my @threads = get_threads_util( $orig_master_handler->{dbh},
        $orig_master_handler->{connection_id} );
      while ( $time_until_read_only > 0 && $#threads >= 0 ) {
        if ( $time_until_read_only % 5 == 0 ) {
          printf
"%s Waiting all running %d threads are disconnected.. (max %d milliseconds)\n",
            current_time_us(), $#threads + 1, $time_until_read_only * 100;
          if ( $#threads < 5 ) {
            print Data::Dumper->new( [$_] )->Indent(0)->Terse(1)->Dump . "\n"
              foreach (@threads);
          }
        }
        sleep_until();
        $_tstart = [gettimeofday];
        $time_until_read_only--;
        @threads = get_threads_util( $orig_master_handler->{dbh},
          $orig_master_handler->{connection_id} );
      }

      ## Setting read_only=1 on the current master so that nobody(except SUPER) can write
      print current_time_us() . " Set read_only=1 on the orig master.. ";
      $orig_master_handler->enable_read_only();
      if ( $orig_master_handler->is_read_only() ) {
        print "ok.\n";
      }
      else {
        die "Failed!\n";
      }

      ## Waiting for M * 100 milliseconds so that current update queries can complete
      my $time_until_kill_threads = 5;
      @threads = get_threads_util( $orig_master_handler->{dbh},
        $orig_master_handler->{connection_id} );
      while ( $time_until_kill_threads > 0 && $#threads >= 0 ) {
        if ( $time_until_kill_threads % 5 == 0 ) {
          printf
"%s Waiting all running %d queries are disconnected.. (max %d milliseconds)\n",
            current_time_us(), $#threads + 1, $time_until_kill_threads * 100;
          if ( $#threads < 5 ) {
            print Data::Dumper->new( [$_] )->Indent(0)->Terse(1)->Dump . "\n"
              foreach (@threads);
          }
        }
        sleep_until();
        $_tstart = [gettimeofday];
        $time_until_kill_threads--;
        @threads = get_threads_util( $orig_master_handler->{dbh},
          $orig_master_handler->{connection_id} );
      }



                print "Disabling the VIP on old master: $orig_master_host \n";
                &stop_vip();     


      ## Terminating all threads
      print current_time_us() . " Killing all application threads..\n";
      $orig_master_handler->kill_threads(@threads) if ( $#threads >= 0 );
      print current_time_us() . " done.\n";
      #$orig_master_handler->enable_log_bin_local();
      $orig_master_handler->disconnect();

      ## After finishing the script, MHA executes FLUSH TABLES WITH READ LOCK
      $exit_code = 0;
    };
    if ($@) {
      warn "Got Error: $@\n";
      exit $exit_code;
    }
    exit $exit_code;
  }
  elsif ( $command eq "start" ) {
    ## Activating master ip on the new master
    # 1. Create app user with write privileges
    # 2. Moving backup script if needed
    # 3. Register new master's ip to the catalog database

# We don't return error even though activating updatable accounts/ip failed so that we don't interrupt slaves' recovery.
# If exit code is 0 or 10, MHA does not abort
    my $exit_code = 10;
    eval {
      my $new_master_handler = new MHA::DBHelper();

      # args: hostname, port, user, password, raise_error_or_not
      $new_master_handler->connect( $new_master_ip, $new_master_port,
        $new_master_user, $new_master_password, 1 );

      ## Set read_only=0 on the new master
      #$new_master_handler->disable_log_bin_local();
      print current_time_us() . " Set read_only=0 on the new master.\n";
      $new_master_handler->disable_read_only();

      ## Creating an app user on the new master
      #print current_time_us() . " Creating app user on the new master..\n";
      #FIXME_xxx_create_app_user($new_master_handler);
      #$new_master_handler->enable_log_bin_local();
      $new_master_handler->disconnect();

      ## Update master ip on the catalog database, etc
                print "Enabling the VIP - $vip on the new master - $new_master_host \n";
                &start_vip();
                $exit_code = 0;
    };
    if ($@) {
      warn "Got Error: $@\n";
      exit $exit_code;
    }
    exit $exit_code;
  }
  elsif ( $command eq "status" ) {

    # do nothing
    exit 0;
  }
  else {
    &usage();
    exit 1;
  }
}

# A simple system call that enable the VIP on the new master 
sub start_vip() {
    `ssh $ssh_user\@$new_master_host \" $ssh_start_vip \"`;
}
# A simple system call that disable the VIP on the old_master
sub stop_vip() {
    `ssh $ssh_user\@$orig_master_host \" $ssh_stop_vip \"`;
}

sub usage {
  print
"Usage: master_ip_online_change --command=start|stop|status --orig_master_host=host --orig_master_ip=ip --orig_master_port=port --new_master_host=host --new_master_ip=ip --new_master_port=port\n";
  die;
}

切换命令

$ masterha_master_switch --master_state=alive --conf=/etc/mha/app1.cnf --new_master_host=slave1 --orig_master_is_new_slave

MHA指令

  • mha检测ssh
masterha_check_ssh --conf=/etc/mha/app1.cnf
  • mha检测复制
masterha_check_repl --conf=/etc/mha/app1.cnf
  • 如果都ok,则启动mha
nohup masterha_manager --conf=/etc/mha/app1.cnf < /dev/null > /var/log/masterha/app1/manager.log 2>&1 &  

可选启动参数:
1.  --remove_dead_master_conf  该参数代表当发生主从切换后,老的主库的ip将会从配置文件中移除。
	  
2.  --ignore_last_failover  在缺省情况下,如果MHA检测到连续发生宕机,且两次宕机间隔不足8小时的话,则不会进行Failover
	  
  • 检测mha状态
masterha_check_status --conf=/etc/mha/app1.cnf
  • 关闭mha
masterha_stop --conf=/etc/mha/app1.cnf

THE END